Banked Curves — Why Racetracks Tilt
Tilt the road on a curve and the road itself pushes the car round the bend, so at the right speed it turns with no grip at all
This concept builds on Centripetal Force — Why Things Curve, Friction: Static and Kinetic Friction, f = μN. Consider exploring them first for the best experience.
A Car Needs a Push to Turn
The car is driving round a flat curve of radius 100 m at 15 m/s. Anything moving in a circle needs a net force pointing at the centre, giving an acceleration of v² ÷ r = 15² ÷ 100 = 2.25 m/s². On a flat road the only sideways force is tyre friction: the green arrow in the view from behind the car. It needs a grip of 2.25 ÷ 9.8 ≈ 0.23, and dry asphalt has about 0.7, so the car holds its line.
Ice on a Flat Road
Drag the 'Grip' slider down to 0, as if the road were sheet ice. Now nothing pushes the car towards the centre. The status turns red and, in the top view, the car drifts wider and wider: with no inward force it carries straight on, which looks like sliding outward. A flat curve depends completely on friction.
Tilt the Road
Keep the grip at 0 and raise the 'Bank angle' slider. The road now leans towards the centre, so the normal force (the road pushing on the car, blue arrow) leans inward too. Its vertical part holds the car up against its weight; its horizontal part pushes the car towards the centre. The road itself is now helping the car turn.
The Design Speed
For every bank there is one speed where weight and the normal force alone give exactly the inward push needed. Move the 'Car speed' slider until 'Grip needed' reads 0.00: the car holds the line on pure ice. Resolving the forces gives tan θ = v² ÷ (r × g), so the design speed is v = √(r × g × tan θ). The 'Design speed' readout tracks it as you change the bank or the 'Curve radius'.
Too Fast, Too Slow
Still on ice, move the 'Car speed' slider away from the design speed. Go faster and the bank cannot supply enough inward push: the car slides up and out. Go slower and the bank pushes too hard: the car slides down to the inside. This is why a banked track has a speed it is built for.
Grip Widens the Window
Raise the 'Grip' slider to 0.30 or more. Friction can now point down the slope (helping when you are too fast) or up the slope (holding you when you are too slow), and the green arrow flips to show which. The 'Safe speeds' readout now shows a whole range instead of a single speed, and it widens as the grip grows.
Worked Example: A 100 m Curve Banked at 20°
What speed needs no friction on a 100 m curve banked at 20°? v² = r × g × tan θ = 100 × 9.8 × 0.364 ≈ 357, so v ≈ 18.9 m/s, about 68 km/h. Set 'Curve radius' to 100 m, 'Bank angle' to 20° and 'Car speed' to 19 m/s: 'Grip needed' falls to almost zero. With a grip of 0.30 the same curve is safe from about 7.5 m/s to 27.0 m/s.
How It Works — Step by Step
-
1
A Car Needs a Push to Turn
The car is driving round a flat curve of radius 100 m at 15 m/s. Anything moving in a circle needs a net force pointing at the centre, giving an acceleration of v² ÷ r = 15² ÷ 100 = 2.25 m/s². On a flat road the only sideways force is tyre friction: the green arrow in the view from behind the car. It needs a grip of 2.25 ÷ 9.8 ≈ 0.23, and dry asphalt has about 0.7, so the car holds its line.
-
2
Ice on a Flat Road
Drag the 'Grip' slider down to 0, as if the road were sheet ice. Now nothing pushes the car towards the centre. The status turns red and, in the top view, the car drifts wider and wider: with no inward force it carries straight on, which looks like sliding outward. A flat curve depends completely on friction.
-
3
Tilt the Road
Keep the grip at 0 and raise the 'Bank angle' slider. The road now leans towards the centre, so the normal force (the road pushing on the car, blue arrow) leans inward too. Its vertical part holds the car up against its weight; its horizontal part pushes the car towards the centre. The road itself is now helping the car turn.
-
4
The Design Speed
For every bank there is one speed where weight and the normal force alone give exactly the inward push needed. Move the 'Car speed' slider until 'Grip needed' reads 0.00: the car holds the line on pure ice. Resolving the forces gives tan θ = v² ÷ (r × g), so the design speed is v = √(r × g × tan θ). The 'Design speed' readout tracks it as you change the bank or the 'Curve radius'.
-
5
Too Fast, Too Slow
Still on ice, move the 'Car speed' slider away from the design speed. Go faster and the bank cannot supply enough inward push: the car slides up and out. Go slower and the bank pushes too hard: the car slides down to the inside. This is why a banked track has a speed it is built for.
-
6
Grip Widens the Window
Raise the 'Grip' slider to 0.30 or more. Friction can now point down the slope (helping when you are too fast) or up the slope (holding you when you are too slow), and the green arrow flips to show which. The 'Safe speeds' readout now shows a whole range instead of a single speed, and it widens as the grip grows.
-
7
Worked Example: A 100 m Curve Banked at 20°
What speed needs no friction on a 100 m curve banked at 20°? v² = r × g × tan θ = 100 × 9.8 × 0.364 ≈ 357, so v ≈ 18.9 m/s, about 68 km/h. Set 'Curve radius' to 100 m, 'Bank angle' to 20° and 'Car speed' to 19 m/s: 'Grip needed' falls to almost zero. With a grip of 0.30 the same curve is safe from about 7.5 m/s to 27.0 m/s.
Key Takeaways
Turning needs an inward force
A car on a curve of radius r at speed v needs a net force towards the centre giving an acceleration of v² ÷ r.
Banking lets the road do the pushing
Tilting the road tilts the normal force, and its horizontal part pushes the car towards the centre of the curve.
One speed needs no friction
The design speed obeys tan θ = v² ÷ (r × g): a 100 m curve at 20° needs no grip at about 18.9 m/s.
Friction covers the difference
Faster than the design speed, friction pushes down the slope; slower, it pushes up the slope. More grip means a wider range of safe speeds.
Connected Concepts
Centripetal Force
A banked road is one more way to supply the inward push mv²/r that every curved path needs.
Friction
On a flat road, sideways tyre friction is the only thing turning the car; banking takes over part of that job.
Forces on an Inclined Plane
The same split of forces along and across a slope, but here the car is also turning.
Vectors
The free body diagram is vector addition: weight, normal force and friction must add up to one horizontal arrow.
Newton's Laws of Motion
Net force = mass × acceleration, with the acceleration pointing to the centre of the curve.
Orbital Mechanics
In an orbit, gravity alone supplies the inward force, so there is one speed for each radius, just like the design speed of a bank.