Doppler Effect — Why Sirens Change Pitch

How motion compresses and stretches waves

Physics Wave Physics intermediate 8 min

This concept builds on Waves — Patterns That Travel Through Space, Sound Waves — Sine in the Physical World. Consider exploring them first for the best experience.

Step 1 of 6

A stationary source

With the 'Source Speed' slider at 0%, the yellow source dot sits still and its wavefronts spread as evenly spaced circles. Observer A on the left and Observer B on the right meet the same number of crests each second, so both hear the emitted pitch. Now drag the yellow dot sideways by hand and watch the circles bunch up on the side you push toward.

Worked Example: a passing ambulance siren

Click 'Ambulance (30 m/s)'. A 700 Hz siren moves at 30 m/s through air where sound travels at 340 m/s. Ahead of it you hear 700 × 340 / (340 − 30) = 700 × 340 / 310 ≈ 768 Hz. Behind it you hear 700 × 340 / (340 + 30) = 700 × 340 / 370 ≈ 643 Hz. The two siren cards show exactly these numbers: the pitch drops by about 125 Hz as it passes.

Crowded ahead, stretched behind

Move the 'Source Speed' slider to 30%. Each new wavefront leaves from further along the path, so circles crowd together in front of the moving dot and spread apart behind it. The observer the arrow points toward meets more crests per second and reads a higher frequency; the other observer reads a lower one. The wave speed never changes — only the spacing does.

Approaching the wave speed

Slide 'Source Speed' past 50% and compare the two observed cards. The pitch ahead follows f × v / (v − vₛ), so the gap in the denominator shrinks and the reading climbs steeply: at 50% it doubles, at 80% it is five times the emitted value. Behind, f × v / (v + vₛ) falls only gently, to two thirds at 50%.

What if the observer moves too?

Move the 'Observer Speed' slider, or click 'Both Moving'. Positive values send both observers toward the source, so each meets crests sooner: the numerator becomes v + vₒ. With the source at 30% and observers at 30%, the observer ahead hears 1.3 / 0.7 ≈ 1.86 times the emitted pitch, and the one behind hears 1.3 / 1.3 = exactly the emitted pitch.

Breaking the sound barrier

Click 'Supersonic Jet' or push 'Source Speed' past 100%. The source now outruns its own wavefronts, which pile up into a dashed cone — the Mach cone. Its half-angle is θ = arcsin(1 / Mach), so at Mach 1.3 the cone opens about 50° each side. Observers ahead hear nothing until the cone sweeps past them as a sudden sonic boom.

How It Works — Step by Step

Step 1 of 6
  1. 1

    A stationary source

    With the 'Source Speed' slider at 0%, the yellow source dot sits still and its wavefronts spread as evenly spaced circles. Observer A on the left and Observer B on the right meet the same number of crests each second, so both hear the emitted pitch. Now drag the yellow dot sideways by hand and watch the circles bunch up on the side you push toward.

  2. 2

    Worked Example: a passing ambulance siren

    Click 'Ambulance (30 m/s)'. A 700 Hz siren moves at 30 m/s through air where sound travels at 340 m/s. Ahead of it you hear 700 × 340 / (340 − 30) = 700 × 340 / 310 ≈ 768 Hz. Behind it you hear 700 × 340 / (340 + 30) = 700 × 340 / 370 ≈ 643 Hz. The two siren cards show exactly these numbers: the pitch drops by about 125 Hz as it passes.

  3. 3

    Crowded ahead, stretched behind

    Move the 'Source Speed' slider to 30%. Each new wavefront leaves from further along the path, so circles crowd together in front of the moving dot and spread apart behind it. The observer the arrow points toward meets more crests per second and reads a higher frequency; the other observer reads a lower one. The wave speed never changes — only the spacing does.

  4. 4

    Approaching the wave speed

    Slide 'Source Speed' past 50% and compare the two observed cards. The pitch ahead follows f × v / (v − vₛ), so the gap in the denominator shrinks and the reading climbs steeply: at 50% it doubles, at 80% it is five times the emitted value. Behind, f × v / (v + vₛ) falls only gently, to two thirds at 50%.

  5. 5

    What if the observer moves too?

    Move the 'Observer Speed' slider, or click 'Both Moving'. Positive values send both observers toward the source, so each meets crests sooner: the numerator becomes v + vₒ. With the source at 30% and observers at 30%, the observer ahead hears 1.3 / 0.7 ≈ 1.86 times the emitted pitch, and the one behind hears 1.3 / 1.3 = exactly the emitted pitch.

  6. 6

    Breaking the sound barrier

    Click 'Supersonic Jet' or push 'Source Speed' past 100%. The source now outruns its own wavefronts, which pile up into a dashed cone — the Mach cone. Its half-angle is θ = arcsin(1 / Mach), so at Mach 1.3 the cone opens about 50° each side. Observers ahead hear nothing until the cone sweeps past them as a sudden sonic boom.

Key Takeaways

Motion changes perceived frequency

A moving source crowds wavefronts ahead of it and stretches them behind. The wave speed and the emitted pitch do not change — only how often crests reach each observer.

One formula covers both sides

f′ = f × (v + vₒ) / (v ∓ vₛ). A 700 Hz siren at 30 m/s in 340 m/s air is heard at about 768 Hz approaching and 643 Hz receding.

Observer motion matters too

An observer moving toward the source meets crests sooner and hears a higher pitch; moving away lowers it. Source motion and observer motion enter the formula differently, so they are not interchangeable.

Supersonic = shock wave

When the source exceeds the wave speed, wavefronts cannot escape ahead of it. They pile up into a Mach cone of half-angle arcsin(1 / Mach) — the sonic boom. The same Doppler shift applies to light, as redshift and blueshift.

Added
Updated
  • — Drag the source by hand, a worked 700 Hz siren example, and a corrected moving-observer readout.