Infrared Spectroscopy — Bonds That Ring Like Springs

Every chemical bond vibrates at its own frequency, and it soaks up exactly the infrared light that matches it

Chemistry Analytical Chemistry intermediate 9 min

This concept builds on Hooke's Law — Springs & Simple Harmonic Motion, Chemical Bonding — How Atoms Stick Together. Consider exploring them first for the best experience.

Step 1 of 7

A Bond Is a Spring

Two atoms joined by a bond behave like two balls on a spring: pull them apart and the bond pulls back, so they swing in and out at one natural frequency. This C–H bond swings about 90 trillion times a second. Chemists quote that as a wavenumber, waves per centimetre of the matching light: here about 3032 cm⁻¹, shown under the atoms and in the 'Bond vibrates at' readout.

A Stiffer Bond Vibrates Faster

Raise the 'Bond stiffness' slider from 500 to 1000 N/m. A stiffer spring pulls back harder, so the atoms swing faster and the wavenumber rises, but by √2, not 2: about 4288 cm⁻¹, just past the edge of the chart. Double and triple bonds are stiffer than single bonds, which is why a C≡C bond vibrates faster than a C–C bond.

Heavier Atoms Vibrate Slower

Set the stiffness back to 500 N/m and move the 'Atom 2 mass' slider from 1 u (H) to 2 u (D, deuterium). Heavier atoms are harder to swing, so the vibration slows. What counts is the reduced mass μ = m₁m₂ ÷ (m₁ + m₂), shown as 'Reduced mass'. It is always smaller than the lighter atom, so the light atom does most of the moving. Altogether ν̃ ≈ 130.3 × √(k ÷ μ).

Tune the Light

Infrared light is an oscillating electric field. Move the 'Light wavenumber' slider until the pink marker sits on the green dip in the spectrum. When the light oscillates in step with the bond, it pushes the bond at just the right moment every swing, like pushing a swing in time: the atoms swing wider and the beam leaving on the right grows dimmer. Off the dip, the light passes straight through.

No Charge Imbalance, No Absorption

Drag 'Bond polarity' down to 0, as in N₂ or O₂ where both atoms share the electrons evenly. The bond still vibrates at the same wavenumber, but the dip vanishes: with no δ+ and δ− ends, the light's electric field has nothing to grab. This is why the nitrogen and oxygen in air let infrared through, while CO₂ and water vapour absorb it.

Reading a Spectrum

Raise 'Bond polarity' to 0.5 or more and the dip returns, deeper for a more polar bond. A real infrared spectrum is the same chart for a whole molecule, one dip for each kind of bond. O–H shows up near 3300 cm⁻¹, C–H near 3000, C≡C near 2130 and C=O near 1720. Reading where the dips are tells a chemist which bonds, and so which groups, a sample contains.

Worked Example: Finding a C=O Bond

Where does a C=O bond absorb, with masses 12 u and 16 u and a stiffness of 1200 N/m? μ = 12 × 16 ÷ 28 ≈ 6.86 u. Then ν̃ ≈ 130.3 × √(1200 ÷ 6.86) = 130.3 × 13.2 ≈ 1723 cm⁻¹. Set 'Atom 1 mass' to 12, 'Atom 2 mass' to 16, 'Bond stiffness' to 1200 and 'Light wavenumber' to 1720: the bond soaks up most of the light. This strong band is the classic sign of a carbonyl group.

How It Works — Step by Step

Step 1 of 7
  1. 1

    A Bond Is a Spring

    Two atoms joined by a bond behave like two balls on a spring: pull them apart and the bond pulls back, so they swing in and out at one natural frequency. This C–H bond swings about 90 trillion times a second. Chemists quote that as a wavenumber, waves per centimetre of the matching light: here about 3032 cm⁻¹, shown under the atoms and in the 'Bond vibrates at' readout.

  2. 2

    A Stiffer Bond Vibrates Faster

    Raise the 'Bond stiffness' slider from 500 to 1000 N/m. A stiffer spring pulls back harder, so the atoms swing faster and the wavenumber rises, but by √2, not 2: about 4288 cm⁻¹, just past the edge of the chart. Double and triple bonds are stiffer than single bonds, which is why a C≡C bond vibrates faster than a C–C bond.

  3. 3

    Heavier Atoms Vibrate Slower

    Set the stiffness back to 500 N/m and move the 'Atom 2 mass' slider from 1 u (H) to 2 u (D, deuterium). Heavier atoms are harder to swing, so the vibration slows. What counts is the reduced mass μ = m₁m₂ ÷ (m₁ + m₂), shown as 'Reduced mass'. It is always smaller than the lighter atom, so the light atom does most of the moving. Altogether ν̃ ≈ 130.3 × √(k ÷ μ).

  4. 4

    Tune the Light

    Infrared light is an oscillating electric field. Move the 'Light wavenumber' slider until the pink marker sits on the green dip in the spectrum. When the light oscillates in step with the bond, it pushes the bond at just the right moment every swing, like pushing a swing in time: the atoms swing wider and the beam leaving on the right grows dimmer. Off the dip, the light passes straight through.

  5. 5

    No Charge Imbalance, No Absorption

    Drag 'Bond polarity' down to 0, as in N₂ or O₂ where both atoms share the electrons evenly. The bond still vibrates at the same wavenumber, but the dip vanishes: with no δ+ and δ− ends, the light's electric field has nothing to grab. This is why the nitrogen and oxygen in air let infrared through, while CO₂ and water vapour absorb it.

  6. 6

    Reading a Spectrum

    Raise 'Bond polarity' to 0.5 or more and the dip returns, deeper for a more polar bond. A real infrared spectrum is the same chart for a whole molecule, one dip for each kind of bond. O–H shows up near 3300 cm⁻¹, C–H near 3000, C≡C near 2130 and C=O near 1720. Reading where the dips are tells a chemist which bonds, and so which groups, a sample contains.

  7. 7

    Worked Example: Finding a C=O Bond

    Where does a C=O bond absorb, with masses 12 u and 16 u and a stiffness of 1200 N/m? μ = 12 × 16 ÷ 28 ≈ 6.86 u. Then ν̃ ≈ 130.3 × √(1200 ÷ 6.86) = 130.3 × 13.2 ≈ 1723 cm⁻¹. Set 'Atom 1 mass' to 12, 'Atom 2 mass' to 16, 'Bond stiffness' to 1200 and 'Light wavenumber' to 1720: the bond soaks up most of the light. This strong band is the classic sign of a carbonyl group.

Key Takeaways

Bonds vibrate like springs

Two atoms on a bond swing at a natural wavenumber ν̃ ≈ 130.3 × √(k ÷ μ), with k in N/m and μ in u.

Stiffness up, mass down, frequency up

Stiffer (double, triple) bonds vibrate faster; heavier atoms vibrate slower. Doubling k multiplies ν̃ by √2.

Light is absorbed only on resonance

A bond takes energy from infrared light only when the light's wavenumber matches the bond's own.

The bond must be polar

A bond with no charge imbalance, like N≡N, cannot absorb infrared at all; a more polar bond gives a deeper band.

Added