Limits — When Numbers Get Infinitely Close

The idea that powers all of calculus

Mathematics Calculus intermediate 8 min

This concept builds on Slope — Rise Over Run: Finding the Slope of a Line. Consider exploring it first for the best experience.

Step 1 of 6

The Secant Line

The gold dot P sits on the curve f(x) = x² at x = 1, and the green dot Q starts at x = 3. The yellow line through both is a secant line, and its slope is Δy / Δx = (9 − 1) / (3 − 1) = 4. The readout box shows Δx and that slope while Q is still far from P.

Q Approaches P

Move the ‘Δx (distance from Q to P)’ slider to the left. Q slides down the curve toward P, Δx shrinks, and the yellow secant pivots around P. Watch the Slope card: it falls from 4 toward 2, creeping closer with every nudge, even though Q never actually lands on P.

Worked Example: Shrinking Δx on x²

At P = (1, 1) the secant slope is ((1 + Δx)² − 1) / Δx = 2 + Δx. With Δx = 1, Q is at (2, 4) and the slope is 3. With Δx = 0.1 the slope is 2.1, and with Δx = 0.01 it is 2.01. The table under the readout lists all three rows, and the highlighted row follows Q: the slope is closing in on 2.

Why Not Just Put Δx = 0?

At Δx = 0, Q lands on P and the slope becomes 0 / 0 — a division by zero with no meaning. A limit sidesteps that: it asks which value the slope approaches as Δx gets arbitrarily close to 0 without ever reaching it. Between Δx = 0.04 and 0.02 the Slope card already reads 2.04, 2.03 and 2.02.

The Tangent Emerges

Push Q all the way in, to the smallest Δx of 0.01. Q merges into P and the yellow secant becomes the red tangent line, while the readout switches to lim slope = 2. That limit is the derivative: f′(1) = 2 for f(x) = x². The formula box below states the same idea for every x.

Both Sides Must Agree

Switch ‘Approach from’ to the left: Q now starts at x = 0, Δx is negative, and the slope still approaches 2 from below. Now pick the corner |x − 1| + 1 in the Function menu. From the left the slope heads to −1, from the right to +1. The two sides disagree, so the limit, and the derivative, do not exist at x = 1.

How It Works — Step by Step

Step 1 of 6
  1. 1

    The Secant Line

    The gold dot P sits on the curve f(x) = x² at x = 1, and the green dot Q starts at x = 3. The yellow line through both is a secant line, and its slope is Δy / Δx = (9 − 1) / (3 − 1) = 4. The readout box shows Δx and that slope while Q is still far from P.

  2. 2

    Q Approaches P

    Move the ‘Δx (distance from Q to P)’ slider to the left. Q slides down the curve toward P, Δx shrinks, and the yellow secant pivots around P. Watch the Slope card: it falls from 4 toward 2, creeping closer with every nudge, even though Q never actually lands on P.

  3. 3

    Worked Example: Shrinking Δx on x²

    At P = (1, 1) the secant slope is ((1 + Δx)² − 1) / Δx = 2 + Δx. With Δx = 1, Q is at (2, 4) and the slope is 3. With Δx = 0.1 the slope is 2.1, and with Δx = 0.01 it is 2.01. The table under the readout lists all three rows, and the highlighted row follows Q: the slope is closing in on 2.

  4. 4

    Why Not Just Put Δx = 0?

    At Δx = 0, Q lands on P and the slope becomes 0 / 0 — a division by zero with no meaning. A limit sidesteps that: it asks which value the slope approaches as Δx gets arbitrarily close to 0 without ever reaching it. Between Δx = 0.04 and 0.02 the Slope card already reads 2.04, 2.03 and 2.02.

  5. 5

    The Tangent Emerges

    Push Q all the way in, to the smallest Δx of 0.01. Q merges into P and the yellow secant becomes the red tangent line, while the readout switches to lim slope = 2. That limit is the derivative: f′(1) = 2 for f(x) = x². The formula box below states the same idea for every x.

  6. 6

    Both Sides Must Agree

    Switch ‘Approach from’ to the left: Q now starts at x = 0, Δx is negative, and the slope still approaches 2 from below. Now pick the corner |x − 1| + 1 in the Function menu. From the left the slope heads to −1, from the right to +1. The two sides disagree, so the limit, and the derivative, do not exist at x = 1.

Key Takeaways

Limit = Approach, Not Arrival

lim(Δx→0) means we study what happens as Δx gets arbitrarily close to 0, never actually reaching it.

Secant → Tangent

As Q approaches P, the secant line through P and Q converges to the tangent line at P.

The Bridge to Derivatives

f′(x) = lim(Δx→0) [f(x+Δx) − f(x)] / Δx. Every derivative is secretly a limit.

Both Sides Must Agree

The slope limit from the left (Δx < 0) and from the right (Δx > 0) must match. At a corner like |x − 1| + 1 they are −1 and +1, so there is no derivative there.

Added
Updated
  • — Added a predict question on where the secant slope heads, and a goal: approach the kink from the left.
  • — Steps now follow the dx slider, with a worked slope-table example