Momentum & Collisions

Why moving objects resist stopping — and how they transfer energy in collisions

Physics Mechanics beginner 7 min

This concept builds on Gravity — Why Things Fall. Consider exploring it first for the best experience.

Step 1 of 6

Momentum: p = mv

Watch the red ball A roll toward the blue ball B. Its momentum is mass times velocity, p = mv, and the red A bar in the momentum chart below the floor shows it. Slide 'Mass A' or 'Velocity A' and that bar stretches. Ball B sits at rest, so its bar starts empty. Momentum is a vector: a bar reaching left of the zero line means that ball is moving left.

The collision: equal and opposite pushes

Where the balls touch, each pushes the other with an equal and opposite force for the same short time. That impulse, F·Δt, equals each ball’s change in momentum, Δp. Watch the momentum bars as the balls separate: whatever the red bar loses, the blue bar gains. Airbags use the same rule, spreading the stopping impulse over more time to lower the force.

Conservation: the Total bar holds still

Look at the Total bar in the momentum chart as the balls separate: it keeps the same length, and the p before and p after rows in the panel match. With no outside force on the pair, p₁ + p₂ = p₁′ + p₂′. Drag 'Mass B' up to 8 kg in elastic mode and ball A bounces back, its bar flipping left of zero, yet the total is still unchanged.

Elastic vs. inelastic: watch the energy bars

Click 'Elastic' and the kinetic-energy chart shows the same Total before and after: like billiard balls, the pair keeps both momentum and kinetic energy. Click 'Inelastic' and the balls stick and roll off together. The momentum Total is unchanged, but the energy Total shrinks, and the KE lost card shows how much became heat, sound and deformation.

Worked Example: 3 kg at 4 m/s hits 2 kg at rest

With the default sliders, ball A has p = 3 × 4 = 12 kg·m/s and KE = ½ × 3 × 4² = 24 J. Elastic: v₁′ = (3 − 2)/5 × 4 = 0.8 m/s and v₂′ = 2 × 3/5 × 4 = 4.8 m/s, so p = 2.4 + 9.6 = 12 and KE stays 24 J. Stuck together: v′ = 12/5 = 2.4 m/s, KE = ½ × 5 × 2.4² = 14.4 J, so 9.6 J is lost.

Equal masses swap their motion

Set 'Mass B' to 3 kg so both balls match, keep elastic mode on, and replay. Ball A stops dead and ball B leaves at 4 m/s: the readouts above the balls show v₁′ = 0.00 and v₂′ = 4.00 m/s, and the red bars empty as the blue bars fill. All the momentum and energy pass from one ball to the other, which is the trick behind Newton’s cradle.

How It Works — Step by Step

Step 1 of 6
  1. 1

    Momentum: p = mv

    Watch the red ball A roll toward the blue ball B. Its momentum is mass times velocity, p = mv, and the red A bar in the momentum chart below the floor shows it. Slide 'Mass A' or 'Velocity A' and that bar stretches. Ball B sits at rest, so its bar starts empty. Momentum is a vector: a bar reaching left of the zero line means that ball is moving left.

  2. 2

    The collision: equal and opposite pushes

    Where the balls touch, each pushes the other with an equal and opposite force for the same short time. That impulse, F·Δt, equals each ball’s change in momentum, Δp. Watch the momentum bars as the balls separate: whatever the red bar loses, the blue bar gains. Airbags use the same rule, spreading the stopping impulse over more time to lower the force.

  3. 3

    Conservation: the Total bar holds still

    Look at the Total bar in the momentum chart as the balls separate: it keeps the same length, and the p before and p after rows in the panel match. With no outside force on the pair, p₁ + p₂ = p₁′ + p₂′. Drag 'Mass B' up to 8 kg in elastic mode and ball A bounces back, its bar flipping left of zero, yet the total is still unchanged.

  4. 4

    Elastic vs. inelastic: watch the energy bars

    Click 'Elastic' and the kinetic-energy chart shows the same Total before and after: like billiard balls, the pair keeps both momentum and kinetic energy. Click 'Inelastic' and the balls stick and roll off together. The momentum Total is unchanged, but the energy Total shrinks, and the KE lost card shows how much became heat, sound and deformation.

  5. 5

    Worked Example: 3 kg at 4 m/s hits 2 kg at rest

    With the default sliders, ball A has p = 3 × 4 = 12 kg·m/s and KE = ½ × 3 × 4² = 24 J. Elastic: v₁′ = (3 − 2)/5 × 4 = 0.8 m/s and v₂′ = 2 × 3/5 × 4 = 4.8 m/s, so p = 2.4 + 9.6 = 12 and KE stays 24 J. Stuck together: v′ = 12/5 = 2.4 m/s, KE = ½ × 5 × 2.4² = 14.4 J, so 9.6 J is lost.

  6. 6

    Equal masses swap their motion

    Set 'Mass B' to 3 kg so both balls match, keep elastic mode on, and replay. Ball A stops dead and ball B leaves at 4 m/s: the readouts above the balls show v₁′ = 0.00 and v₂′ = 4.00 m/s, and the red bars empty as the blue bars fill. All the momentum and energy pass from one ball to the other, which is the trick behind Newton’s cradle.

Key Takeaways

Conservation laws are the most powerful tools in physics

You don't need to know the details of a collision force — just the masses and velocities before. Conservation of momentum gives you the velocities after. This is why it's used in particle physics, spacecraft design, and ballistics.

Energy is NOT always conserved in collisions

Only momentum is always conserved in closed systems. Kinetic energy is only conserved in perfectly elastic collisions. In real life, some energy always becomes heat or sound.

Centre of mass and Newton's 3rd Law

During a collision, both objects exert equal and opposite forces on each other (Newton's 3rd Law). These internal forces cancel out, which is why total momentum doesn't change — even though each object's momentum does.

Added
Updated
  • — New connections to Coefficient of Restitution, Glancing Collisions and Radiation Pressure.
  • — New connection to Elastic Collisions, where kinetic energy is conserved as well as momentum.
  • — Momentum and energy bars for each ball, after-collision speed readouts, and a worked 3 kg at 4 m/s example