Nervous System — Action Potential
How a neuron fires and sends its signal: threshold, the Na⁺/K⁺ spike, and fast conduction along myelinated axons
Resting potential: a charged membrane
Watch the voltage trace under the neuron: at rest it lies flat on the −70 mV line, the inside negative relative to the outside. Sodium-potassium pumps move 3 Na⁺ out for every 2 K⁺ in, and leaky K⁺ channels hold the charge. The red Na⁺ dots wait above the axon.
Threshold: fire at 30%, then at 50%
Set 'Stimulus Intensity' to 30% and press 'Fire Stimulus': the trace bumps to about −59 mV, short of the dashed threshold line at −55 mV, then fades. Now try 50% — the trace crosses threshold and a full spike fires. Any stronger stimulus gives the same spike: all-or-none.
Depolarization: Na⁺ rushes in
Once threshold is crossed, voltage-gated Na⁺ channels along the top of the axon light up and the red Na⁺ dots dive inward. Sodium floods in down its electrochemical gradient, and the trace shoots from −70 mV to about +40 mV — the rising edge of the spike.
Repolarization: K⁺ flows out
Within a millisecond the Na⁺ channels inactivate, while slower voltage-gated K⁺ channels along the bottom of the axon open. Watch the teal K⁺ dots move outward as the trace falls from +40 mV, overshooting to about −80 mV before it recovers.
Refractory period: no second spike yet
As the trace climbs back from −80 mV to −70 mV, the inactivated Na⁺ channels cannot reopen, so for about 1 ms no stimulus can fire another spike. This caps the firing rate and keeps the signal travelling one way — away from the soma.
Saltatory conduction: hopping node to node
In the Propagation phase the axon is wrapped in myelin segments. The glowing spike jumps from one gold node of Ranvier to the next, because myelin insulates the stretches between nodes and only the nodes fire. The Conduction readout shows 120 m/s. Then toggle 'Myelin sheath' off to compare.
Worked Example: 1 metre at 120 m/s versus 2 m/s
With the myelin off, the spike crawls the bare axon continuously. Time = distance ÷ speed: a myelinated motor fibre covers 1 m in 1 ÷ 120 ≈ 0.008 s, about 8 ms; an unmyelinated pain fibre at 2 m/s needs 1 ÷ 2 = 0.5 s — 60 times longer. That is why the dull ache of a stubbed toe lags behind.
How It Works — Step by Step
-
1
Resting potential: a charged membrane
Watch the voltage trace under the neuron: at rest it lies flat on the −70 mV line, the inside negative relative to the outside. Sodium-potassium pumps move 3 Na⁺ out for every 2 K⁺ in, and leaky K⁺ channels hold the charge. The red Na⁺ dots wait above the axon.
-
2
Threshold: fire at 30%, then at 50%
Set 'Stimulus Intensity' to 30% and press 'Fire Stimulus': the trace bumps to about −59 mV, short of the dashed threshold line at −55 mV, then fades. Now try 50% — the trace crosses threshold and a full spike fires. Any stronger stimulus gives the same spike: all-or-none.
-
3
Depolarization: Na⁺ rushes in
Once threshold is crossed, voltage-gated Na⁺ channels along the top of the axon light up and the red Na⁺ dots dive inward. Sodium floods in down its electrochemical gradient, and the trace shoots from −70 mV to about +40 mV — the rising edge of the spike.
-
4
Repolarization: K⁺ flows out
Within a millisecond the Na⁺ channels inactivate, while slower voltage-gated K⁺ channels along the bottom of the axon open. Watch the teal K⁺ dots move outward as the trace falls from +40 mV, overshooting to about −80 mV before it recovers.
-
5
Refractory period: no second spike yet
As the trace climbs back from −80 mV to −70 mV, the inactivated Na⁺ channels cannot reopen, so for about 1 ms no stimulus can fire another spike. This caps the firing rate and keeps the signal travelling one way — away from the soma.
-
6
Saltatory conduction: hopping node to node
In the Propagation phase the axon is wrapped in myelin segments. The glowing spike jumps from one gold node of Ranvier to the next, because myelin insulates the stretches between nodes and only the nodes fire. The Conduction readout shows 120 m/s. Then toggle 'Myelin sheath' off to compare.
-
7
Worked Example: 1 metre at 120 m/s versus 2 m/s
With the myelin off, the spike crawls the bare axon continuously. Time = distance ÷ speed: a myelinated motor fibre covers 1 m in 1 ÷ 120 ≈ 0.008 s, about 8 ms; an unmyelinated pain fibre at 2 m/s needs 1 ÷ 2 = 0.5 s — 60 times longer. That is why the dull ache of a stubbed toe lags behind.
Key Takeaways
All-or-nothing principle
An action potential either fires fully or not at all — a 30% stimulus that stalls near −59 mV gives no spike, while 50% and 100% give the same +40 mV spike. Signal strength is instead encoded in firing frequency.
Ion channels are the key machinery
Voltage-gated Na⁺ and K⁺ channels open and close in a precise sequence. Toxins like tetrodotoxin (blocking Na⁺ channels) or drugs like local anaesthetics exploit this machinery to silence neurons.
Speed depends on myelination and axon diameter
Large myelinated motor fibres conduct at up to 120 m/s, crossing 1 m in about 8 ms. Thin unmyelinated pain fibres manage about 2 m/s and need half a second — that is why the slow ache sets in after the first sharp sting.
Connected Concepts
Action Potential
Zoom in on a single spike: scrub its five stages and probe the threshold in finer detail.
Synaptic Transmission
When the spike reaches the axon terminal, it triggers the chemical hand-off to the next cell.
Cell Membrane
The resting voltage lives across the lipid bilayer, and the ion channels are proteins embedded in it.
Waves
A travelling spike is a wave of voltage moving along the axon at a definite speed.
The Reflex Arc
In a knee-jerk reflex, a signal runs in on a sensory neuron and out on a motor neuron through the spinal cord, in about 22 ms.
Updated
- — New connection to The Reflex Arc.
- — Steps follow the canvas phases; added a 30% vs 50% threshold test and a Myelin sheath switch with conduction times