The Unit Circle — Where Trig Lives

Why a circle with radius 1 is the Rosetta Stone of trigonometry

Mathematics Trigonometry beginner 8 min
Step 1 of 6

A Circle of Radius 1

The red point travels around a circle centred at the origin with radius exactly 1. However far it turns, it stays 1 unit from the centre. The angle θ is measured counter-clockwise from the positive x-axis. Drag the point, or move the 'Angle θ' slider, and watch the readouts below the canvas change.

Worked Example: The Point at 60°

Press '60°' in the Jump to row. The point lands at (0.5, 0.866). Those two numbers are cos 60° = 1/2 = 0.5 and sin 60° = √3/2 ≈ 0.866. Check that it really is on the circle: 0.5² + 0.866² = 0.25 + 0.75 = 1. The same test works at every angle, because every point on this circle is 1 unit from the centre.

The Coordinates Are Cosine and Sine

Toggle 'cos θ' and 'sin θ' to show the two dashed legs of the right triangle under the radius. The blue horizontal leg is the x-coordinate, cos θ; the green vertical leg is the y-coordinate, sin θ. With a hypotenuse of 1, the ratios adjacent/hypotenuse and opposite/hypotenuse are simply the side lengths.

Tangent Is the Slope of the Radius

Toggle 'tan θ' to draw the tangent segment at x = 1. Its height is tan θ = sin θ / cos θ, the slope of the radius. At 45° the rise equals the run, so tan 45° = 1. Near 90° and 270° cos θ approaches 0 and the segment shoots off the canvas — tangent is undefined there.

Reference Angles and Quadrant Signs

Toggle 'Reference angle and signs'. The purple arc marks α, the acute angle back to the x-axis, and each quadrant shows its (cos, sin) signs. Press '150°': α = 30°, so the sizes match 30°, but quadrant II makes cos negative. The exact label reads (−√3/2, 1/2). Every special angle is a 30°, 45° or 60° value with signs attached.

Challenge: Find the Angle

Press 'New challenge' for a clue such as "sin θ = −1/2 and cos θ is positive". Work it out: the signs fix the quadrant (IV), the value fixes α = 30°, so θ = 330°. Set the angle by dragging or with the slider, then press 'Check my angle'. A wrong answer gets a hint about the quadrant or the reference angle.

How It Works — Step by Step

Step 1 of 6
  1. 1

    A Circle of Radius 1

    The red point travels around a circle centred at the origin with radius exactly 1. However far it turns, it stays 1 unit from the centre. The angle θ is measured counter-clockwise from the positive x-axis. Drag the point, or move the 'Angle θ' slider, and watch the readouts below the canvas change.

  2. 2

    Worked Example: The Point at 60°

    Press '60°' in the Jump to row. The point lands at (0.5, 0.866). Those two numbers are cos 60° = 1/2 = 0.5 and sin 60° = √3/2 ≈ 0.866. Check that it really is on the circle: 0.5² + 0.866² = 0.25 + 0.75 = 1. The same test works at every angle, because every point on this circle is 1 unit from the centre.

  3. 3

    The Coordinates Are Cosine and Sine

    Toggle 'cos θ' and 'sin θ' to show the two dashed legs of the right triangle under the radius. The blue horizontal leg is the x-coordinate, cos θ; the green vertical leg is the y-coordinate, sin θ. With a hypotenuse of 1, the ratios adjacent/hypotenuse and opposite/hypotenuse are simply the side lengths.

  4. 4

    Tangent Is the Slope of the Radius

    Toggle 'tan θ' to draw the tangent segment at x = 1. Its height is tan θ = sin θ / cos θ, the slope of the radius. At 45° the rise equals the run, so tan 45° = 1. Near 90° and 270° cos θ approaches 0 and the segment shoots off the canvas — tangent is undefined there.

  5. 5

    Reference Angles and Quadrant Signs

    Toggle 'Reference angle and signs'. The purple arc marks α, the acute angle back to the x-axis, and each quadrant shows its (cos, sin) signs. Press '150°': α = 30°, so the sizes match 30°, but quadrant II makes cos negative. The exact label reads (−√3/2, 1/2). Every special angle is a 30°, 45° or 60° value with signs attached.

  6. 6

    Challenge: Find the Angle

    Press 'New challenge' for a clue such as "sin θ = −1/2 and cos θ is positive". Work it out: the signs fix the quadrant (IV), the value fixes α = 30°, so θ = 330°. Set the angle by dragging or with the slider, then press 'Check my angle'. A wrong answer gets a hint about the quadrant or the reference angle.

Key Takeaways

Why radius 1?

Radius 1 makes the hypotenuse = 1, so sin and cos are just the opposite and adjacent sides — pure ratios, no scaling needed.

Coordinates encode trig

Any point (x, y) on the unit circle satisfies x = cos(θ) and y = sin(θ). At 60° that is (0.5, 0.866). The circle IS the definition of sine and cosine.

x² + y² = 1 always

The Pythagorean identity sin²θ + cos²θ = 1 is just the equation of the unit circle restated.

Reference angle + quadrant = exact value

Any special angle reduces to 30°, 45° or 60° (its reference angle) plus the signs of its quadrant: 150° has the sizes of 30° with cos negative, giving (−√3/2, 1/2).

Added
Updated
  • — Reference-angle overlay with exact values, a find-the-angle challenge, a 60° worked example and three new quiz items.