Wave Reflection — Why Pulses Bounce Back Upside Down
Send a pulse down a rope into a wall, a free ring or a heavier rope, and see exactly how much bounces back, which way up, and how much carries on
This concept builds on Waves — Patterns That Travel Through Space. Consider exploring it first for the best experience.
A Pulse Hits a Wall
Flick one end of a rope and a bump runs along it. Each bit of rope only moves up and down; it is the shape that travels. Here the far end is tied to a wall ('Boundary': Fixed end). Watch the 6 cm pulse arrive and come back upside down. The wall cannot move, so as the pulse lifts the rope there, the wall pulls it back down, launching an inverted copy.
A Free End Sends It Back Upright
Set 'Boundary' to 'Free end (ring on a pole)'. Now the end is a ring that slides freely up and down the pole. Nothing holds it down, so when the pulse arrives the ring overshoots to twice the pulse's height and then flings an upright copy back. Same rope, same pulse: only what the end is allowed to do has changed.
An Identical Rope: No Echo at All
Set 'Boundary' to 'Joined to a second rope' and leave 'Second rope mass per metre' at 1×. The joint is now just more of the same rope, so the pulse sails through and nothing comes back. A pulse only reflects where the rope changes. The bigger the change, the bigger the echo.
A Heavier Rope: Part Bounces Back Inverted
Raise 'Second rope mass per metre' to 2× or more. The heavy rope is hard to shake, so it acts partly like a wall: some of the pulse bounces back upside down, and the rest carries on, shorter and slower. With ρ the second rope's mass per metre divided by the first's, the bounce is (1 − √ρ) ÷ (1 + √ρ) of the pulse and the speed falls to 1 ÷ √ρ.
A Lighter Rope: Part Bounces Back Upright
Now lower 'Second rope mass per metre' below 1×. The light rope gives way easily, so it acts partly like a free end: the reflection is upright, and the pulse that carries on is taller than the one you sent, and faster. At 0.25× the 6 cm pulse goes on at 8 cm. The carried-on height is always 1 + (the reflected height), because the joint belongs to both ropes.
Energy Splits, It Is Never Lost
Push 'Second rope mass per metre' all the way to 9×. The bounce is (1 − 3) ÷ (1 + 3) = −½, a pulse half as tall and upside down. The energy a pulse carries goes as its height squared, so (½)² = 25 % of the energy comes back and 75 % carries on. Even a rope nine times heavier lets most of the energy through; only a true wall reflects all of it.
Worked Example: A Rope Tied to One Four Times Heavier
A 6 cm pulse meets a rope 4 times heavier per metre. √4 = 2, so the reflected pulse is (1 − 2) ÷ (1 + 2) = −⅓ × 6 = −2 cm (upside down) and the carried-on pulse is 2 ÷ 3 × 6 = 4 cm, moving at half the speed. Energy: (⅓)² ≈ 11 % comes back and 89 % goes on. Set 'Pulse height' to 6 cm and 'Second rope mass per metre' to 4× to check.
How It Works — Step by Step
-
1
A Pulse Hits a Wall
Flick one end of a rope and a bump runs along it. Each bit of rope only moves up and down; it is the shape that travels. Here the far end is tied to a wall ('Boundary': Fixed end). Watch the 6 cm pulse arrive and come back upside down. The wall cannot move, so as the pulse lifts the rope there, the wall pulls it back down, launching an inverted copy.
-
2
A Free End Sends It Back Upright
Set 'Boundary' to 'Free end (ring on a pole)'. Now the end is a ring that slides freely up and down the pole. Nothing holds it down, so when the pulse arrives the ring overshoots to twice the pulse's height and then flings an upright copy back. Same rope, same pulse: only what the end is allowed to do has changed.
-
3
An Identical Rope: No Echo at All
Set 'Boundary' to 'Joined to a second rope' and leave 'Second rope mass per metre' at 1×. The joint is now just more of the same rope, so the pulse sails through and nothing comes back. A pulse only reflects where the rope changes. The bigger the change, the bigger the echo.
-
4
A Heavier Rope: Part Bounces Back Inverted
Raise 'Second rope mass per metre' to 2× or more. The heavy rope is hard to shake, so it acts partly like a wall: some of the pulse bounces back upside down, and the rest carries on, shorter and slower. With ρ the second rope's mass per metre divided by the first's, the bounce is (1 − √ρ) ÷ (1 + √ρ) of the pulse and the speed falls to 1 ÷ √ρ.
-
5
A Lighter Rope: Part Bounces Back Upright
Now lower 'Second rope mass per metre' below 1×. The light rope gives way easily, so it acts partly like a free end: the reflection is upright, and the pulse that carries on is taller than the one you sent, and faster. At 0.25× the 6 cm pulse goes on at 8 cm. The carried-on height is always 1 + (the reflected height), because the joint belongs to both ropes.
-
6
Energy Splits, It Is Never Lost
Push 'Second rope mass per metre' all the way to 9×. The bounce is (1 − 3) ÷ (1 + 3) = −½, a pulse half as tall and upside down. The energy a pulse carries goes as its height squared, so (½)² = 25 % of the energy comes back and 75 % carries on. Even a rope nine times heavier lets most of the energy through; only a true wall reflects all of it.
-
7
Worked Example: A Rope Tied to One Four Times Heavier
A 6 cm pulse meets a rope 4 times heavier per metre. √4 = 2, so the reflected pulse is (1 − 2) ÷ (1 + 2) = −⅓ × 6 = −2 cm (upside down) and the carried-on pulse is 2 ÷ 3 × 6 = 4 cm, moving at half the speed. Energy: (⅓)² ≈ 11 % comes back and 89 % goes on. Set 'Pulse height' to 6 cm and 'Second rope mass per metre' to 4× to check.
Key Takeaways
Waves reflect where the medium changes
A pulse passes an identical joint untouched; any change in the rope sends part of it back.
Fixed or heavier: inverted
An end that cannot move, or a heavier rope, sends the reflection back upside down. A free end or a lighter rope sends it back upright.
How much bounces back
Reflected height ÷ sent height = (1 − √ρ) ÷ (1 + √ρ); the carried-on pulse is 2 ÷ (1 + √ρ) of it and travels at 1 ÷ √ρ of the speed.
Energy splits, it is never lost
The reflected energy is the square of the reflected fraction; the rest carries on.
Connected Concepts
Waves
A pulse is the simplest wave: a shape that travels while each bit of rope only moves up and down.
Standing Waves
A string tied at both ends keeps reflecting inverted pulses back and forth; the overlap is a standing wave.
Thin-Film Interference
Light reflecting off a slower (denser) layer flips upside down, just like a pulse hitting a heavier rope.
Air Column Resonance
Sound reflects off both the closed and the open end of a pipe, the air versions of a fixed and a free end.
Refraction
At the same boundary where part of a wave reflects, the rest carries on at a new speed.
The Human Ear
The middle-ear bones bridge air and fluid so sound carries on instead of bouncing back.
Seismic Waves
Earthquake waves partly reflect wherever the rock changes, which is how layers deep underground are mapped.