Buoyancy — Why Things Float
PlayHow the density of an object and its fluid decide whether it sinks or swims
This concept builds on Gravity — Why Things Fall. Consider exploring it first for the best experience.
What is Buoyancy?
When you place an object in a fluid, the fluid pushes it upward. This upward push is the buoyant force, the blue Fb arrow on the block and the blue bar in the force panel. It exists because pressure increases with depth, so the bottom of the block feels more pressure than the top. The red Fg bar is the block's weight pulling down.
Archimedes' Principle: Drag the Block
The buoyant force equals the weight of the fluid the block pushes aside: F_b = ρ_fluid × V_submerged × g. Drag the block deeper into the tank and watch the blue bar grow as more of it goes under; lift it out and the bar shrinks. Let go and the block bobs back to the depth where the blue and red bars match.
Sink or Float? Compare the Densities
Move the 'Object density' slider above the value on the 'Fluid density' slider, for example to 1500 kg/m³ in water. The block sinks to the floor of the tank: even fully under water it cannot displace enough fluid to match its weight, and the panel reads Sinks, then Resting. Slide it back below 1000 kg/m³ and it rises again.
Change the Fluid
Move the 'Fluid density' slider, or click the 'Oil' or 'Mercury' buttons, to change the liquid while the block stays the same. Set the 'Object density' slider to 900 kg/m³: the block floats in water but sinks in oil (800 kg/m³). In mercury (13600 kg/m³) even a 7800 kg/m³ steel block floats with only about 57% under the surface.
Worked Example: A 600 kg/m³ Block in Water
With the default settings the block has density 600 kg/m³ in water at 1000 kg/m³. It floats with 600 / 1000 = 60% submerged. The block holds 0.001 m³, so its mass is 0.6 kg and it weighs 0.6 × 9.8 ≈ 5.9 N. It displaces 0.0006 m³ of water, and the buoyant force is 1000 × 0.0006 × 9.8 ≈ 5.9 N. The Submerged card reads 60%.
Equilibrium: Ice and Ships
A floating object settles where the buoyant force equals its weight, so the fraction submerged equals ρ_object / ρ_fluid. Ice (917 kg/m³) in water floats with about 92% under the surface. A steel ship floats because its hollow hull, full of air, gives it an average density well below that of water.
How It Works — Step by Step
-
1
What is Buoyancy?
When you place an object in a fluid, the fluid pushes it upward. This upward push is the buoyant force, the blue Fb arrow on the block and the blue bar in the force panel. It exists because pressure increases with depth, so the bottom of the block feels more pressure than the top. The red Fg bar is the block's weight pulling down.
-
2
Archimedes' Principle: Drag the Block
The buoyant force equals the weight of the fluid the block pushes aside: F_b = ρ_fluid × V_submerged × g. Drag the block deeper into the tank and watch the blue bar grow as more of it goes under; lift it out and the bar shrinks. Let go and the block bobs back to the depth where the blue and red bars match.
-
3
Sink or Float? Compare the Densities
Move the 'Object density' slider above the value on the 'Fluid density' slider, for example to 1500 kg/m³ in water. The block sinks to the floor of the tank: even fully under water it cannot displace enough fluid to match its weight, and the panel reads Sinks, then Resting. Slide it back below 1000 kg/m³ and it rises again.
-
4
Change the Fluid
Move the 'Fluid density' slider, or click the 'Oil' or 'Mercury' buttons, to change the liquid while the block stays the same. Set the 'Object density' slider to 900 kg/m³: the block floats in water but sinks in oil (800 kg/m³). In mercury (13600 kg/m³) even a 7800 kg/m³ steel block floats with only about 57% under the surface.
-
5
Worked Example: A 600 kg/m³ Block in Water
With the default settings the block has density 600 kg/m³ in water at 1000 kg/m³. It floats with 600 / 1000 = 60% submerged. The block holds 0.001 m³, so its mass is 0.6 kg and it weighs 0.6 × 9.8 ≈ 5.9 N. It displaces 0.0006 m³ of water, and the buoyant force is 1000 × 0.0006 × 9.8 ≈ 5.9 N. The Submerged card reads 60%.
-
6
Equilibrium: Ice and Ships
A floating object settles where the buoyant force equals its weight, so the fraction submerged equals ρ_object / ρ_fluid. Ice (917 kg/m³) in water floats with about 92% under the surface. A steel ship floats because its hollow hull, full of air, gives it an average density well below that of water.
Key Takeaways
Buoyant Force
F_b = ρ_fluid × V_displaced × g. The upward push depends only on the fluid density and the volume of fluid displaced.
Density Decides
An object floats when its density is less than the fluid’s density, and sinks when it’s greater.
Fraction Submerged
For a floating object, the submerged fraction equals ρ_object / ρ_fluid. Lower object density means it rides higher.
Archimedes' Insight
The displaced fluid weighs exactly as much as the buoyant force — this is how Archimedes measured the gold content of the king’s crown.
Connected Concepts
Gravity
Gravity pulls the object down — buoyancy pushes back.
Gas Laws
Pressure and density are central to both gas behavior and buoyancy.
Momentum
A sinking object accelerates until drag and buoyancy balance gravity.
Bernoulli's Principle
Fluid pressure again — this time changing with speed instead of depth.
Ship Stability
Buoyancy decides how deep a ship floats; where the buoyant force acts as it heels decides whether it rolls back upright.
Hydrostatic Pressure
Pressure grows with depth as P = ρgh, so the push under an object beats the push on top, and that difference is buoyancy.
Isostasy
Earth's crust floats on the slowly flowing mantle by the same rule: it sinks until it pushes aside its own weight.
Updated
- — New connections to Ship Stability, Hydrostatic Pressure and Isostasy.
- — Drag the block to change how much is under water; new steps for both density sliders and a worked 60% example