Wind Turbine Power & the Betz Limit
Why a turbine's power grows with the cube of the wind speed — and why it can never catch more than 59.3% of it
This concept builds on Conservation of Energy — Nothing Is Lost. Consider exploring it first for the best experience.
Wind Is Moving Mass
Watch the streaks flow from left to right: each one is a parcel of air. Air is light — about 1.225 kg per cubic metre — but a turbine's rotor sweeps a huge circle, so tonnes of air pass through it every second. Each kilogram moving at speed v carries kinetic energy ½v². The energy that arrives each second is the power in the wind, and the turbine can only catch a share of it.
Building P = ½ρAv³
Put the pieces together. The mass of air reaching the rotor each second is ρAv: density × swept area × speed. Multiply by ½v² of energy per kilogram and you get P = ½ρAv³. Move the 'Wind speed' slider from 5 to 10 m/s: the Power in the Wind card jumps from 0.60 MW to 4.81 MW. Double the speed brings twice the air, each kilogram with four times the energy — eight times the power.
Longer Blades, Squared Gains
Now move the 'Rotor diameter' slider. The swept area is A = π(D ÷ 2)², so it grows with the diameter squared. At 8 m/s, a 50 m rotor faces 0.62 MW of wind, while a 100 m rotor faces 2.46 MW — double the blade length, four times the power. That is why modern turbines carry blades longer than a football pitch is wide.
Catching Power Means Slowing the Air
A turbine can only take energy out of the wind by slowing it down. Move the 'Wake speed' slider, which sets the speed of the air behind the rotor as a share of the incoming wind. At 100% the air passes untouched and the turbine catches nothing. Slow it and the share climbs — but slowed air spreads out (watch the dashed streamtube widen) and less fresh air gets through the rotor. Slow it too much and the share falls again.
The Betz Limit: 16/27
With b the wake speed as a fraction of the wind speed, the captured share is Cp = ½(1 + b)(1 − b²). Its peak sits at b = 1/3: set 'Wake speed' to 33% and the Share Captured card reads 59.3%, which is 16/27. No turbine in an open stream can beat this, however clever its blades — this is the Betz limit. Real turbines reach roughly 45–50%.
Worked Example: A 100 m Rotor in a 10 m/s Wind
The swept area is A = π × 50² ≈ 7854 m². The power in the wind is P = ½ × 1.225 × 7854 × 10³ ≈ 4.81 MW. At the Betz limit the turbine catches 0.593 × 4.81 ≈ 2.85 MW. If the wind drops to 5 m/s, the wind's power falls to one eighth, 0.60 MW, and the most the turbine can catch is about 0.36 MW.
How It Works — Step by Step
-
1
Wind Is Moving Mass
Watch the streaks flow from left to right: each one is a parcel of air. Air is light — about 1.225 kg per cubic metre — but a turbine's rotor sweeps a huge circle, so tonnes of air pass through it every second. Each kilogram moving at speed v carries kinetic energy ½v². The energy that arrives each second is the power in the wind, and the turbine can only catch a share of it.
-
2
Building P = ½ρAv³
Put the pieces together. The mass of air reaching the rotor each second is ρAv: density × swept area × speed. Multiply by ½v² of energy per kilogram and you get P = ½ρAv³. Move the 'Wind speed' slider from 5 to 10 m/s: the Power in the Wind card jumps from 0.60 MW to 4.81 MW. Double the speed brings twice the air, each kilogram with four times the energy — eight times the power.
-
3
Longer Blades, Squared Gains
Now move the 'Rotor diameter' slider. The swept area is A = π(D ÷ 2)², so it grows with the diameter squared. At 8 m/s, a 50 m rotor faces 0.62 MW of wind, while a 100 m rotor faces 2.46 MW — double the blade length, four times the power. That is why modern turbines carry blades longer than a football pitch is wide.
-
4
Catching Power Means Slowing the Air
A turbine can only take energy out of the wind by slowing it down. Move the 'Wake speed' slider, which sets the speed of the air behind the rotor as a share of the incoming wind. At 100% the air passes untouched and the turbine catches nothing. Slow it and the share climbs — but slowed air spreads out (watch the dashed streamtube widen) and less fresh air gets through the rotor. Slow it too much and the share falls again.
-
5
The Betz Limit: 16/27
With b the wake speed as a fraction of the wind speed, the captured share is Cp = ½(1 + b)(1 − b²). Its peak sits at b = 1/3: set 'Wake speed' to 33% and the Share Captured card reads 59.3%, which is 16/27. No turbine in an open stream can beat this, however clever its blades — this is the Betz limit. Real turbines reach roughly 45–50%.
-
6
Worked Example: A 100 m Rotor in a 10 m/s Wind
The swept area is A = π × 50² ≈ 7854 m². The power in the wind is P = ½ × 1.225 × 7854 × 10³ ≈ 4.81 MW. At the Betz limit the turbine catches 0.593 × 4.81 ≈ 2.85 MW. If the wind drops to 5 m/s, the wind's power falls to one eighth, 0.60 MW, and the most the turbine can catch is about 0.36 MW.
Key Takeaways
Power Grows With the Cube of Wind Speed
P = ½ρAv³: faster wind brings more air each second and more energy in every kilogram. Double the wind speed and the power rises eightfold.
Power Grows With the Square of Blade Length
The swept area is π(D ÷ 2)², so doubling the rotor diameter quadruples the power available — the reason turbines keep getting bigger.
Extracting Energy Means Slowing the Air — But Not Too Much
Energy comes only from slowing the wind, yet slowed air spreads out and lets less fresh air through. The best balance leaves the wake at one third of the wind speed.
The Betz Limit Caps Every Turbine at 59.3%
The captured share Cp = ½(1 + b)(1 − b²) peaks at 16/27 ≈ 59.3% when b = 1/3. No open-rotor turbine can do better.
Connected Concepts
Conservation of Energy
The turbine's electricity is exactly the kinetic energy the air loses as it slows down.
Fluid Dynamics
Continuity — slow air must spread into a wider tube — is what stops a turbine taking it all.
Bernoulli's Principle
The pressure drop across the rotor is what pushes on the blades and turns them.
Stationary Points
The Betz limit is a maximum: set the derivative of ½(1 + b)(1 − b²) to zero and b = 1/3 falls out.
Electromagnetic Induction
The spinning rotor drives a generator, where a moving magnet turns motion into current.
Momentum
Slowing the air takes momentum out of it, so the wind pushes back on the rotor with a thrust force.